QuantumII 1000 Watt Grow Light Ballast HPS/MH QT1000 II. 120V/240V
PRICE IS FOR EACH
Used in great working condition!! (NO POWER CORD). Any questions feel free to ask. Thank you for looking!!
INSTRUCTION DIMMABLE BALLAST
QT1000 • QT600 • QT400
Quantum ballasts are designed and built for commercial growing environments.
Features: Soft Start Technology ensures that lamp start-up is as lamp friendly as possible while maintaining consistent
ignition. Randomized firing sequencing allows large ballast installations to be turned on simultaneously without taxing circuit
breakers or Factor: 99%
Crest Factor: 1.7%
Input Voltage Range 100-265 VAC
Total Harmonic Distortion (THD) < 10%
Operating Temperature: -30°C (-22°F) to 55°C (131°F)
Output Frequency: ≥ 30KHz
Strikes both HPS and MH lamps
Strikes bulbs from distances up to 100ft
Compatible with ALL Flip Box brands
Generator Ready
50 Hertz to 60 Hertz operation allows for bulb brand
and type versatility
Operating Instructions:
1. Make sure the power supply cord and lamp lead are properly connected.
2.Ensure the bulb is properly seated in the socket assembly. It should be tight, but not stressed.
3.Always use a bulb centric to the highest output of the ballast (e.g. 1000w bulb/1000w ballast, 600w bulb/600w ballast, etc.)
4.Confirm the ballast is not near any source of moisture or standing water.
5.Check the sealed bearing fan to confirm it is free from any obstruction. This should be periodically checked to make sure it
stays clear and clean.
6.Plug the power supply cord into an appropriate power supply.
7. After ignition, give your lamp a minimum of 30 seconds to reach full power.
8. Always allow the bulb to cool before re-striking the ballast; we recommend 15 minutes.
9.Ballast can be cleaned using a clean, dry towel. Should the ballast somehow become wet, turn off main power supply and
unplug the unit before attending to it.
10. Allow 10 seconds between power adjustments when using the Dimmer Switch. This will allow the ballast sufficient time to
gather electrical charge to increase wattage output.
