This item has been shown 115 times.
Why Choose Us
Ultrasonic mist maker fogger 10 head humidifier greenhouse Aeromist Hydroponics
1.Waterscape pool manufacturing fog
5.Greenhouse flowers humidification
6.Printed Electronics humidification
1. Atomized water quality and adaptable, the same nebulizer use pure water or tap water can work.
2. The power for a wide range of products to ensure that the changes in the city still under normal use larger occasions.
3. With power supply polarity protection circuit prevents damage to the product user interface instead (reverse does not work).
4. There boot delay circuit, to avoid a power surge current excessive damage to the line.
5. A single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets.
6. The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not affect the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer.
7. This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product
6.Spray volume: 3500- 5000ML / H
7.Cooling model :Air-cooled
8.Shell Material: 304 stainless steel shell, shell polished surface treatment
1. When the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded.
2. Nebulizer must be working in the water in order, before using the water and then put it in its power, and to ensure that there is water in a spray film surface state, in order to avoid damage to the nebulizer.
3. When you stop using the nebulizer before disconnect the power, then remove from the water atomizer.
4. When using the nebulizer, please use the output power of more than 250W, the output voltage is DC45 ± 5V supply.
5. When generating a plurality of atomizer is set using the same container, each with a separate power supply need not connect a plurality of the nebulizer for use with a single power supply, and note the respective atomizer are mutually conductive housing, in order to prevent the work galvanic corrosion.
6. Mist generated by the nebulizer must use fan forced discharge, and each group of nebulizer reserved 350CM2 of flat space, the water temperature is too high to avoid shortening the life of the nebulizer.
7. Nebulizer not suitable for corrosive liquid atomization, to avoid damage to the atomizer and atomized metal sheet.
8. Do not damaged during installation level sensor switch, switch failure caused the water level to prevent runaway nebulizer. Level switch should stop after the damage, otherwise there will be further damaged dry atomized piece atomizer. At this point in order to use the required repairs by qualified service personnel after a good.
1 x 10 head Ultrasonic mist maker
1 x Waterproof transformer(with 1.5m power line)
- Shipping Policy
- About Us
- Payment Mathord
- Returns Policy
- About response
We offer WORLDWIDE SHIPPING. (Except China, Italy, Croatia and so on...)
Orders will be processed and dispatched within 24-48 hours after payment is clear.
We only ship to confirmed addresses. Your address MUST MATCH your Shipping address.
If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!
Please note that estimated delivery time is depended on destination countries, and may subject to customs clearance process, and weather condition in your area.
Our office hours areMonday-Friday, 10:00AM to 5:00PM (PST).
We are more than happy to help you check product compatibility, answer any question regarding our policy, products, prices, discounts for multiple pieces, shipping and handling fees, returns and item details. Please contact us by going to "Ask a Question" at the bottom of our listing, or click our ID "eleoption2015", then Contact Member.
1. PayPal payment accepted only.
2. Items will be shipped to your address. Please make sure it is correct.
3. Payment must be received 4 days after sale ended.
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication with us. Please allow max 2 business days for us to response.
When you satisfied with our product and services please leave us positive response.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on .