Hydroponics Online Store



Hydroponic Systems

Hydroponic Grow Lights & Bulbs

Hydroponic Tents & Grow Boxes

Hydroponic Ballasts

Grow Light Reflectors

Hydroponic Nutrients

Grow Media Rocks

Hydroponic Pumps

Hydroponic Pots

Hydroponic Books

Meters

Hydroponic Exhaust Fans

Hydroponic Seeds

Hydroponic Foggers

Home Store Blog Forums FAQs Lesson Plans Pictures


Search:



POLLINATOR-TUMBLER-POLLEN EXTRACTOR-SIFTER-HASH MACHINE-HYDROPONICS For Sale


POLLINATOR-TUMBLER-POLLEN EXTRACTOR-SIFTER-HASH MACHINE-HYDROPONICS
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.



Buy Now

POLLINATOR-TUMBLER-POLLEN EXTRACTOR-SIFTER-HASH MACHINE-HYDROPONICS :
$285.00

Hello and thanks for checking out our sale
Our pollinators are built with pride right here in the USA and are built to run smooth, produce a great product, and we use the proper material to make them as contaminate free as possible.
They are not built cheep, and they are well worth the price if you want something that works greatand produces a great product
We use Food/Beverage Grade Paint by Rust-oleum for contamination purposes because contamination can be a big problem
The pictures you see are stock pictures, but you will receive the same looking item
About our Pollinators.
The drum is 12” long and 8” wide, and has a supply opening that is 4.75”, which makes it easy to load and unload your product, and can handle 150 grams at one time with no problem with room to spare.
We use 105 micron stainless steel mesh on our drums which produces a great and clean product.
All mesh on the edges of our drums have been stapled down, then coated with a food grade rubber coating that keeps the mesh in its place, keeping it from coming loose to prevent any fraying.
The supply cap is made out of a 1/16” gauge round metal plate that is 7 inches in diameter, and has a round wooden disc fastened to it that fits snug and will not move as the drum turns. We have also installed (4) Neodymium magnets that are very strong from the inside of the drum, making it look clean with no visibility of them.
For an additional feature the drum can turn in either direction with making it easy to stir up the product if needed, and also comes with a 11.5 foot cord that makes it easy to move around, or if you care to keep it out of sight, you can do just that.
The drum can be remover or replaced in a matter of 10 seconds or less. Just make sure the white square on the motor side is up, then lift up the right side of the drum a little and slide it to the right and it comes right out.
Reinstalling the drum, just reverse the process. Lower the left side down a bit and guide it into the flange while lowering the right side. Set the right side into the support and your done...Easy as 1..2..3..
We don’t use any bearings on the drum for a few reasons. One, it’s just something else that can go wrong.
In time they can get rusty or sticky from your product causing them to freeze up.Rust is contamination..Instead of a bearing, we us a support that made from Polytetrafluoroethylene. It has the high melting point and the lowest ware that will not lock up or rust, also food grade, plus it is easy to clean.. Anything gets on it, just use a bit of alcohol on a rag and wipe it down...That\'s it, Clean and just like new.
The motors we use are center shaft motors that contain steel gears and produce the right amount of speed that makes the contents tumble well. Not wasting any time, but also not rushing the process..
To slow takes to much more time to break up you product well when tumbling.Some people say fast is not good. That is totally false.Slow take a long time to produce anything or get anywhere.
Even if the drum is full, it still turns at the same speed.
The motor specifications are as followed.
Power: 14W Voltage: 110Volts
Speed: 15 RPM’S
The torque on the out shaft 11.087 Foot LBS
This is a very strong motor..
The top is made from a 1/4” thick clear plexiglass which also fit snug leaving no gaps for material to slip through and easy to keep clean.
Our boxes are also food grade that can with-stand 100 LBS or better. If you drop this box, it will not break like wood or glass. The box is 1/8” thick, nothing cheep, 18\" long, 12.5\" wide, and 12\" tall.It can be cleaned using soap and water, or alcohol, keeping the build up down and any contamination out.
We believe the price of our item is very reasonable based on the material we use, and how safe and solid it is made. If you care to make us an offer we can’t refuse or have any questions, please ask and we shall get back to you..
Thanks for looking and have a Blessed Day
We ship to the CONTINENTAL USA ONLY using UPS
NO PO BOXES

Buy Now


 

Hydroponic Forum Discussions:


Popular Hydroponic Items: