This item has been shown 2 times.
Hydroponic Grow Light Controller,Grow Lighting Controller,8000/16000Watt Smart Grow Lighting controller, Supported Lights: HID/LED/HPS
I have been making these boxes to order for years and I have had very good response from my clients, everything is done by hand. Now I have redesigned the enclousure and other aspects to sell it online but the concept remains the same. Easy to use, intuitive interface, and the most important thing, long durability.
buy and test it, if it is not what you expected just return it and I will refund your money plus the shipping price.
Do not forget to leave your comment about the product to help other user or with the aim of continuing to improve it.
COMPRADORES DE LENGUA ESPA~OL, DE ESTAR INTERESADO ME DEJAN SABER ,HABLO ESPA~OL PERFECTO.
Powered by Eaton / Cutler Hammer Contactor - 30 Amp
Two operation modes:
M1:(Run two rooms)-Flip 16 lights in two separate areas, 8 lights will be On while the other ones remaining in Off untill the timer reach the setup scheduled.
M 2: Capability to drive up to 16 lights 1000 Watt Each,(16000watts max).
Built in Circuit Breaker:
Each output is protected by 30 amp circuit breaker, this guarantees 100% safety against short circuits and overloads.
Built in Programmable delay:
the programmable delay (1~9)min provides protection for your lights should your power go out.
with this feature the outputs never will be turning ON at the same time.
"START" key multiplexed(Key have two function):
-first Funtion : start Lights
-Secund Funtion: turn ON/OFF outputs (output#2 or output#4 depending the selected mode) Allowing Add / remove light into the growing area..
The box incorporates two ports to connect one, two or more digital temperature control,
If the temperature in the growing Area exceeds the level set in the DTC (Digital Temperature Control) the box will turn off all lights and display an alarm to let the operator know the lights have been turned off due to temperature in the growing area (LEDs M1,M2 will be FLASHING at THE SAME TIME TO A FREQUENCY OF 500 Mseg),
The system will never rise again until the operator presses the RESET key.
Two Temperature Sensor will be included with your purchase, Temperature feature is optional you can use it or not , is recomended user connect the two sensor to the OverHeat Protection port in order to keep the grow area safe due the temperature issue.
- Powered by Microcontroller
- each output is protected by 30 amp Circuit breaker.
- programmable delay beteen outputs(1 min to 9 min),Light never will goes ON at the same time
- integrated one port to connect one, two or more Temperature sensors .
- is you choice, just with one touch! choosing M1 allow setup up to 16 light 1000 watt each in one Room , or M2 to Dual zones allow you to run two separate environments-8/8light
- sixteen NEMA type 6-15 240-volt outlet receptacles.
- 120V Trigger Cords activate outlet zones.
- hardwire to panel.
- INPUT: 240VAC, Rated for 50Amp, to 80Amp at 240V,3-Wire Main Connection.
- Designed and manufactured in Miami,Fl.
Quick Start Guide:
Connect the Power Wires to 220/240 volt to 80 Amp circuit breaker.
2: Connect the control Cord to a regular 120 volt 60 Hz outlet..
3: Press RESET button to restart the box.
4: program 24-hour timer for the desired schedule.
5: Press Delay KEY to Set the desired delay (possible values between one to nine minutes).
6: Selects the Working Mode:
M1 -> split 16 lights between two grow rooms .
M2 -> 16 lights for the same grow room.
7: press START button to start..
CLICK HERE TO WATCH VIDEO
HOW TO SET DALAY!!!
M1 - HOW TO!!!
M2 - HOW TO!!!!
OVERHEAT PROTECTION SET UP !!
RECOVERY PROCESSAFTER POWER ISSUE.!!
Terms and Conditions.
- Once a offer has been placed, it is a legally binding contract of
- Payment must be received within 5 working days of purchase,
however if this is not possible, please let us know to discuss
- If payment is not received within 7 days of purchase then a
Non Paying Buyer Dispute will be filed, and 10 days later a final
fee credit lodged.
- You will be notified on the day that your goods have been
despatched via e-mail.
- Please note that if there are any
problems, contact us first via e-mail giving full details of any
problem along with your user ID.
- 7 days after we have despatched your order, if we have not been
notified by you of any problem, or received response, we will send a
- It is the customers responsibility to ensure that payment is
received in the due time as listed above.
- By committing to buy you agree that you have read the listing
fully and understand the sale.
- Goods will be despatched within 48 hrs of cleared fund, subject to
the conditions listed in the payment section above.
- We accept no responsibility for goods delayed due to the services
of couriers or internet related mailing systems.
By committing to buy you
are agreeing to the Terms & Conditions stated above.