www.hydroponicsonline.com 
Picture Page 13

 

 

ass1.jpg (14597 bytes) How To: 28 plant gallon system To build a 28 plant 40 foot gallon system first we start with 4 10 foot sections of 4 inch sewer pipe and for the cradle that will hold the gallon bottles upright I will use top fence rail cut and ready to assemble. You can also use wood to build a cradle.
ass.jpg (16318 bytes) How To: 28 plant gallon system Assembling the cradle. Just like playing with erector sets when I was a kid.
drill.jpg (16505 bytes) How To: 28 plant gallon system I use a1 1/4 inch drill bit to drill the holes every 16 inches that the bleach bottles will screw into.
bott.gif (36830 bytes) How To: 28 plant gallon system After cutting the bottoms of the gallon bottles out I push them into the holes I drilled in the sewer pipe.
hose.jpg (15244 bytes) How To: 28 plant gallon system Now I run 1/2 inch irrigation hose the full length of the garden that connects to the submersible pump.

LAST PAGE / NEXT PAGE
HOME

Copyright 1996-06  by Hydroponics Online All rights reserved .Revised:01/01/06